A SERVICE OF

logo

96440 v.10.0 9
fully inserted (+/-
1
4 inch) and that all
mount hangers are in the forward
position (see
Figure 4).
16. Remove the protective covering
from the tailpipe tip.
Caution: The
protective covering may ignite and
burn if not removed prior to running
the engine.
17. Your system includes two “Banks
Power” logos designed to complement
the Ford badging on your truck. Use the
provided measurements (see
Figure 5)
to position the logos for a clean
factory look.
18. Re-connect negative battery
cable(s). Start the engine and listen
for exhaust leaks. Tighten the exhaust
clamps as necessary. Whenever
possible, tack-welding slip connections
to prevent disengagement is
Figure 5