Cisco Systems WIP310 Manual

next previous

Configuration 2

Handset Navigation Pad

Tonavigatethroughthephone

menus,usetheNavigationPad.The

selectbuttonisthesilverbuttonin

themiddleofthenavigationpad.

Thearrowsareusedtomoveup,

down,leftandrightthroughthe

phonemenus.

TheWireless-GIPPhonerequiresthatyouhavephoneservicethrougha

VoIPprovidertomakephonecalls.Inordertouseyourphone’sVoIPservice,

youmustfirstconnectyourWireless-GIPPhonetoawirelessnetwork

whichhasinternetaccess.

Whenyoupoweronthephoneforthefirsttime,youwillseethatthephone

isnotconfiguredtoconnecttoanetwork.Toconnectyourphonetoyour

wirelessnetwork,youmustfirstconfigurethephonebysettingupaWi-Fi

Profile.TherearetwowaystoconfiguretheWi-FiProfile:Automaticallyvia

Wi-FiProtectedSetupandManually.

NOTE:Thehandsetshouldbewithin300feet(90m)ofthe

Networktoconnect.

NavigationPad