A SERVICE OF

logo

- 62 -
3. Console -- 1K Xmodem update
firmware
We provide the 1k X modem to update firmware on console. 1K X modem only works in 57600bps
mode. So you must change boudrate to 57600bps to download firmware.
There are 2 cases to use 1k X modem to update firmware:
a. User enters "1K X modem receiver mode" through pressing any key within 5 seconds after system
power on.
b. System automatically enters "1K X modem receiver mode" if it detects the firmware checksum
fail while booting.
1. Press disconnect button when you start 1K X modem modes.
Press File -> Properties, change boudrate to 57600bps, then press OK.