A SERVICE OF

logo

Open as PDF
next previous
1. Remove the wheel center cap, if equipped.
2. Put the tire on the ground at the rear of the vehicle
with the valve stem pointed down, and to the rear.
3. Tilt the retainer
downward and through
the wheel opening.
Make sure the retainer
is fully seated across
the underside of
the wheel.
4. Attach the wheel wrench (H) and extensions (I)
together.
5. Insert the hoist end (F)
of the wheel wrench
through the hole (G) in
the rear bumper and
into the hoist shaft.
5-95