Chevrolet 1997 Manual

A SERVICE OF

next previous

8.

Start the engine and allow

it

to

run in idle for

approximately four minutes. By this time, the

coolant level inside the radiator will be lower. Add

more

of

the proper

mix

through the filler neck until

the

level reaches the base

of

the filler neck.

4.

Fill with the proper

DEX-COOL@

coolant mixture.

Add coolant until

you

see a steady stream of coolant

coming from

the

bleed valves.

5.

Close

the

bleed valves.

I

E

6.

Continue to fill the radiator up to the base

of

the

filler neck.

7.

Rinse

or

wipe the spilled coolant from the engine

and compartment.

9.

Shut

the

engine off and replace

the

pressure cap. Be

sure the arrows on the cap line up like this.

5-27