A SERVICE OF

logo

6
Changing Vavles
VALVE BODY ASSEMBLY: When bolting the
valve body back up to the transmission, torque all
the bolts to 8 ft/lbs.
6.See the Separator Plate Drilling diagram to see where to drill out the two holes, then use the 1/8th drill bit that
is included with the kit to drill out those two holes.
7. Finally reassemble the valve body and then install back onto the transmission. Torque the bolts that connect
the valve body to the transmission to 8 ft/lbs.
SEPARATOR PLATE DRILLINg DIAgRAm