27
Basic Operation
3
Press on the projector to
select the INPUT mode.
Note
• When a signal is not received,
“Searching” will be displayed.
Note
• If you select “Auto” as the input
source, then the correct input source
is selected automatically.
4
Press on the remote control
or on the projector, then press
Enter to turn off the projector,
when the confirmation message
is displayed.
Note
• If you accidentally press power
and do not want to turn off the
projector, press Exit button or wait
until the confirmation message
disappears.
Info
• Do not unplug the power cord during
projection or cooling fan operation.
This can cause damage due to the
rise in internal temperature, as the
cooling fan also stops.
INPUT
COMPONENT 1
COMPONENT 2
VIDEO/S-VIDEO
DVI/PC
T, S, W, X
buttons
EXIT button
Power button
MENU button
INPUT button
INPUT
STATUS
EXIT
INPUT
MENU
ECO
ENTER
Component 2
button
Component 1
button
DVI/PC button
Video/
S-Video button
About the INPUT modes
S-Video
Use this option to select
the S-Video input source.
Video
Use this option to select
the composite video input
source.
Component
1&2
Use this option to select a
YPbPr, SDTV, or HDTV
component input source.
DVI
Use this option to select
the DVI input source.
PC
Use this option to select
the computer as an input
source.
Main Menu
