Section 10: Specifications
Black Hawk 600-120/60-36 or 600-120/60-48
AC Input Voltage ……………………… 120 volts AC, nominal
Nominal Input Voltage Tolerance ..… ±10% (108-132 volts)
AC Input Current ……………………… 6 amps, nominal
Input Frequency ……………………….. 60, ± 3 Hz
Line Reject Value ……………………… 95 VAC, nominal
Line Accept Value …………………….. 105 VAC, nominal
Power Factor …………………………… 0.9 typical (line mode operation)
Output Voltage ………………………… 60 / 75 / 89 VAC selectable taps
Output Voltage Tolerance …………… +5% and –2% load regulation over input range
Output Current ………………………… 10 / 8 / 6.7 amps (into resistive load)
Output Power …………………………… 600 watts
Efficiency (Line Mode) ………………… Better than 90% over line voltage range, at full load
Efficiency (Inverter Mode) ……………. Better than 85% at nominal battery, full load
Run Time (Battery Input) ……………… Greater than 2 hours @ full load with 90A-H battery
DC Input (Battery) Voltage …………… 3-battery system (18-cells): 36V nominal
4-battery system (24-cells): 48V nominal
Low Battery Shutdown ……………….. 1.75 V/cell (31.5V for 18-cells or 42.0V for 24-cells)
Battery Acceptance Voltage …………. 3-battery system: not less than 28 volts
4-battery system: not less than 38 volts
Battery Charge Current ……………….. 5 amps @ nominal AC input
Battery Float Voltage ………………….. 2.27 V/ cell (41.0V for 18-cells or 54.6V for 24-cells)
Temperature Compensation …………. -0.05V/°F (-0.09V/°C) slope
Protection ……………………………….. DC Input: 80A magnetic/hydraulic circuit breaker
AC Output: 20A thermal circuit breaker
Operating Temperature Range ……… -40°C to +60°C (-40°F to +140°F)
At 5% to 95% relative humidity, non-condensing
Size ………………………………………. 8.6” H x 15” W x 12.5” D
(219 mm x 381 mm x 318 mm)
Weight …………………………………… xx Lbs. (xx Kg)
Status Monitoring Options ………….. StatTrak (HMS protocol)
HMS-to-Legacy converter allowing analog status monitoring
29
