Chapter 5: Operation
724-746-5500 | blackbox.com
Page 31
5.2.2 To select an autoscan period
1 Enter the Configuration menu.
2 Press and then press either:
to choose Autoscan disabled,
to choose 2 seconds,
to choose 5 seconds,
to choose 7seconds,
to choose 15 seconds,
to choose 30 seconds,
to choose 1 minute, or
to choose 5 minutes.
3 Press to accept the setting and return to the main menu section.
4 Press and then to exit the menu and save changes.
5.2.3 To start autoscanning
• On the keyboard, press .
Notes:
During autoscanning, mouse switching, hot key + tab and interactivity with the computers are all disabled.
During autoscanning, only the KVM and speaker ports are switched to each visited computer channel, the two USB device ports
remain connected to their currently selected channels.
5.2.4 To stop autoscanning
You can stop the autoscanning process in either of the following ways:
• Press the COMPUTER button on the front panel, or
• Select a specific channel using the hot keys + channel number.
