86 10/100 Managed Hub
Link Status: The current link status of the port.
• Link Down: Link pulses are not detected on this port.
• Link Up: Link pulses are being received on this port.
NOTE: When the port link test function is disabled, the Port
Link Status always returns Link Up for ports.
Polarity Status: The current polarity link status of the port.
• Rx Polarity Normal: The receive polarity of the given port
is not reversed.
• Rx Polarity Reversed: The receive polarity of the given
port is reversed and has been automatically crossed by
the repeater.
Auto Partition: The current partition status of the port.
• Not Auto Partitioned: The port is not partitioned
• Auto Partitioned: The port is partitioned
Speed: This is the current speed of this port. The default is
Auto Negotiate.
• Auto Negotiate: The port speed is automatically negotiated
to the fastest speed with the device connected to the port.
• Force 10-TP: The port is forced to operate at 10Mbps only,
and can only pass data with 10Mbps devices.
• Force 100-TP: The port is forced to operate at 100Mbps
only and can only pass data with 100Mbps devices.
Isolate Status (100Mbps Port Only): Indicates whether this
100Mbps port is currently isolated by the repeater.
• Isolated: The port is isolated.
• Interface Type: The interface type of the port.
(TP port interface type)
Port Control
Lists the configurable functions and provides option fields, use Ctrl + S
to toggle between options.
Admin State: The current administration state of the port.
(enable/disable)
