ServSwitch Wizard VGA (USB)
724-746-5500 | blackbox.com
Page 10
724-746-5500 | blackbox.com
2.5.2 Rear Panel
Figure 2-3 shows the rear panel of the unit. Table 2-2 describes its components:
Figure 2-3. Rear panel.
Table 2-2. Rear panel components.
Number Component Description
4 2.5-mm Barrel connector Power input or power supply connects here.
5 (2) USB Type A connectors Connect the console’s USB keyboard and mouse to these connectors.
6 3.5-mm RCA connector User console audio port: Connect optional speakers to this connector.
7 RJ-45 port *Options port: This top 10p10c port is used to allow external control of channel
switching and also to update the internal firmware when necessary by connecting to
a computer.
8 (4) USB Type B connectors Connect to a USB port on each computer.
9 (4) 3.5-mm RCA connectors Connect to the speaker output socket on each computer (optional connection).
10 (2) USB Type A connectors Connect to the console's USB 2.0 peripheral devices (optional connection).
11 (4) VGA connectors Connect to the video output port of each computer.
12 VGA connector Connect to the console's video monitor
*NOTE: The OPTIONS port uses a 10p10c socket, which can accommodate both 10p10c connectors as well as the much
more common 8p8c connectors, which are used on Ethernet leads and patch cables. The pin-outs for both types of
connectors are listed in Appendix C.
4 3 2 1
USB2.0
SWITCHED
USB 1
USB 2
5V
2.5A
INDOOR
USE
ONLY
USER
CONSOLE
OPTIONS
12 11 11
11 11
4
5 6 7 8 9 8 9 8 9 8 9 10
