SERVSWITCH PANTHER
16
16
4. Operating the system
Switch between the connected computers by either
• The front panel Select buttons
• Keyboard hotkeys
• The OSD (On Screen Display)
The OSD is also the place to adjust various settings as explained below.
When switching computers the illuminated LED of the top bank indicates which
computer is currently selected.
4.1 The keyboard hotkeys
To switch to the next computer forwards press Shift then, +. Release Shift, before
pressing +.
To switch to the next computer backwards press Shift then, -. Release Shift, before
pressing -.
Note
With a US English keyboard you can use the + key of the alphanumeric section or of the numeric
keypad. With a Non-US English keyboard only use the
+ key of the numeric keypad.
4.2 The OSD
To display the OSD:
Press Shift twice. The OSD Main window appears. See Figure 9. Lines with blue text
show active computers. Lines with grey text show inactive computers.
The Type column indicates whether a computer “C” or another switch “S” is
connected to the port.
Port number
appears here
Instruction
keys
C=computer
S=switch
Figure 9 The OSD Main window
