A SERVICE OF

logo

18
6 x 4 ELECTRONIC SCSI SWITCH
4.2.2 K
EYPAD
Use the keypad to select menu and setup parameters for the SCSI Switch.
MENU: Returns to the SCSI Switch setup and configuration menu.
ENTER: Selects the highlighted setup parameter.
UP, DOWN, RIGHT, LEFT Arrows: Scrolls the cursor to enable menu
selection.
4.2.3 I
NDICATORS
The indicators provide SCSI Switch status information.
POWER: Indicates that the SCSI Switch is powered.
BUSY: Indicates that there is SCSI activity on one or more SCSI ports.
ALARM: A visual and audible alarm indicates a failure of an internal power
supply or that the SCSI Switch has exceeded the set temperature limit.
NOTE
To disable the audible alarm, press the front-panel MENU key. The
ALARM light will remain lit until the condition is corrected.