Chapter 6 CLI – Layer 3
186 P332G-ML User’s Guide
ip access-default-action Command
Use the ip access-default-action command to set the default action for a
specific policy list.
The syntax for this command is:
ip access-default-action <policy-list-number> <default-
action>
Example:
Router-N>ip access-default-action 101 default-action-deny
ip access-list-name Command
Use the ip access-list-name command to set a name for a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
Example:
Router-N>ip access-list-name 101 morning
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
<policy-list-number> integer (100..199)
<default-action> default-action-deny|default-action-permit
<policy-list-number> integer (100..199)
<name> list name
