Avaya C360 Manager User Guide 245
IP Route
The following parameters are displayed:
The parameters in the OSPF Link State Database window are read-only.
You can limit the table entries displayed. To start the display of entries
from a specified interface and IP address:
1. Click .
Or
Select
Action > Start Point. The Start Point dialog box opens.
Figure 20-15. OSPF Link State Database Start Point Dialog Box
2. Select an LSA Type from the
LSA Type listbox.
Table 20-12. OSPF Link State Database Window
Field Description
LSA Type
The type and format of the link state
advertisement; for example, Router links and
Network links.
LSA ID
Identifies the part of the routing domain that is
described by the advertisement. The LSA ID can
be either a router ID or an IP address.
Router ID
Identifies the originating router in the
autonomous system.
Sequence No.
The sequence number of the link state
advertisement. Use this parameter to detect old
and duplicate link state advertisements. The
larger the sequence number, the more recent
the advertisement. Note that the sequence
number is usually negative.
LSA Age
The age of the link state advertisement (in
seconds).
Checksum
This parameter is a checksum of the complete
contents of the advertisement, not including the
Age value.
