Chapter 4. Administrator Utility
43
System Event Reports
The KM0832 can be configured to send an e-mail notification whenever the
DHCP server assigns a new IP address to the KM0832. Enable the Mail
Notification feature and specify the Simple Mail Transfer Protocol (SMTP)
server address, information for a valid e-mail account on the server, and the
e-mail address of the person to whom the message should be sent.
To enable system event reports:
1. Under System Event Report Settings, click Ye s to enable Mail
Notification.
2. Enter the address of the SMTP server.
3. If the SMTP server requires authentication, click Ye s to enable SMTP
Authentication. If not, skip to Step 6.
4. In the Account Name field, enter the username for a valid e-mail account
on the SMTP server entered in Step 2.
5. In the Password field, enter the password for the e-mail account in Step 4.
6. In the From field, enter the e-mail address for the e-mail account in Step 4.
7. In the To field, enter the e-mail address of the person to whom the
notification message should be sent.
8. Click Save.
