2
Figure 1 - Model ATD81048 Nomenclature
Do not use this device for any purpose other than that for which it is expressly intended.
!
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and/or operator shall have an understanding of safe use/operating procedures
before attempting to use. The owner and/or operator shall be aware that the use of this product may require special
skills and knowledge. Instructions and safety information shall be conveyed in the operator’s native language before
use of this device is authorized. If any doubt exists as to the safe and proper use of this product as outlined in this
factory authorized manual, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any
Pneumatic Chair that appears damaged in any way, operates abnormally or is missing parts, shall be removed
from service immediately and the manufacturer notied. If you suspect that this product was subjected to a shock
load (a load dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a
factory authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). It is
recommended that an annual inspection be done by qualied personnel. Labels and owner’s manuals are available
from manufacturer (see Replacement Parts, page 4).
PRODUCT DESCRIPTION
This device is designed to support and transport, along a smooth and level surface, one person, tools, and equipment
weighing 300 lbs. or less for the purpose of performing automotive maintenance or service. This device is not
intended, designed or engineered to be used for any other purpose.
SPECIFICATIONS
Model Rated Capacity Minimum Height Maximum Height
ATD81048 300 lbs 17-1/8"
21-3/8"
caster
tool drawer
seat
tool drawers
cylinder
