2
Model Capacity Roller Spread Overall Size (L x W x H)
ATD7229 300 lbs. 19-1/2" 50" x 27-1/2" x 20"
SPECIFICATIONS
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and/or operator of this equipment shall have an understanding of this equipment and
safe operating procedures before attempting to use. The owner and/or operator shall be aware that use and repair
of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in
the operator's native language before use of this product is authorized. If any doubt exists as to the safe and proper
use of this wheel dolly, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including labels) are noted.
Any tire cart that appears damaged in any way, operates abnormally or is missing parts, shall be removed from
service immediately and the manufacturer notied. If you suspect that the product was subjected to a shock load (a
load dropped suddenly, unexpectedly upon it), immediately discontinue use until it has been checked by a factory
authorized service center (contact distributor or manufacturer for list of Authorized Service Centers). Replace worn
or damaged parts with Factory Authorized Replacement Parts only. Labels and owner’s manuals are available from
manufacturer.
PRODUCT DESCRIPTION
The Atd Tools Tire Cart is designed to facilitate the removal, transportation and installation of a single pneumatic
tire/wheel assembly as found on many trucks, buses and trailers. This is NOT suitable for use as a wheel and tire
puller. It is designed ONLY for use in removing up to rated capacity tire and wheel assemblies which are not bound
and/or seized up at the brake drum or hub assemblies.
NEVER load this device with more than the weight of the tire to be moved!
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Atd Tools Technical Service line (636)327-
9050. Read the owner's manual completely and familiarize yourself thoroughly with this product, its components,
and recognize the hazards associated with its use.
2. Assemble the Tire Cart as shown in Figure 2.
3. Check to ensure the Tire Cart wheels roll freely and smoothly before putting into service. Replace worn or damaged
parts with Factory Authorized Replacement Parts only. Contact the manufacturer or distributor of this product for
a list of factory authorized service centers.
To avoid crushing and related injuries and or property damage:
• Read, understand and follow all printed materials provided with and on this product.
• Do not exceed rated capacity.
• Use only on hard, level surfaces capable of sustaining the load.
• Always use both hands to control tire and Tire Cart.
• Move slowly and maintain tire in as close to vertical position as possible.
• No alterations shall be made to this product.
• Failure to heed these markings may result in personal injury and/or property damage.
WARNING
!
!
