Owner and/or Operator Responsibility
The owner and/or operator shall study the product instructions and retain them for future reference.
Operation
The owner and/or operator shall have an understanding of the product, its operating characteristics,
and safety operating instructions before operating the ATD-7462 jack. Safety information shall be
emphasized and understood. If the operator is not fluent in English, the product and safety instructions
shall be read to and discussed with the operator in the operator's native language by the purchaser/owner
or his designee, making sure that the operator comprehends their contents.
Maintenance
The ATD-7462 jack shall be maintained in accordance with the product instruction.
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Keep moving parts clean; lubricate moving parts every 3 months.
Inspection
(a) Visual inspection shall be made before each use of the ATD-7462 jack by checking for abnormal
conditions, such as cracked welds, and/or damaged, loose, or missing parts.
(b) Other inspections shall be made per product operating instructions.
(c) Each ATD-7462 jack shall be inspected immediately if the device is believed to have been subjected
to an abnormal load or shock. It is recommended that this inspection be made by a qualified technician.
(d) Owners and/or operators should be aware that repair of the ATD-7462 jack is not possible. It is
recommended that an annual inspection of the ATD-7462 jack be made by a qualified technician and that
in the case of any defective parts, decals, or safety labels or signs, the ATD-7462 be replaced.
Damaged Equipment
Any ATD-7462 jack that appears to be damaged in any way, is found to be worn or operates abnormally
SHALL BE REMOVED FROM SERVICE AND REPLACED.
Alterations
Because of potential hazards associated with this type of equipment, no alterations shall be made to the
ATD-7462 jack.
Attachments and Adaptors
Do not use attachments and/or adaptors. None are supplied by the manufacturer. Use of any attachments
or adaptors with the ATD-7462 jack is extremely dangerous and could result in personal injury or death.
