2-22
Chapter 2: Hardware information
Chapter 2
3. USB 3.0 connector (20-1 pin USB3_34)
This connector is for the additional USB 3.0 ports, and complies with the USB 3.0
specicaton that supports up to 5Gbps connection speed. If the USB 3.0 front panel
cable is available from your system chassis, with this USB 3.0 connector, you can have
a front panel USB 3.0 solution.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
4. USB 2.0 connectors (10-1 pin USB56~USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specication that supports up to
480Mbps connection speed.
The USB 2.0 module is purchased separately.
