2-24 Chapter 2: BIOS setup
CPU Voltage [Auto]
Allows selection of the CPU VCore voltage. The conguration options vary
depending on the CPU installed. Setting to Auto allows the BIOS to detect the
voltage of the CPU installed. Conguration options: [Auto] [1.7000V] ... [1.1000V]
(with adjustment range of 0.0125V).
CPU PLL Voltage [Auto]
Conguration options: [Auto] [1.50V] [1.70V].
DRAM Voltage [Auto]
Allows you to select the DRAM reference voltage.
Conguration options: [Auto] [1.80V] [1.90V] [2.00V] [2.10V].
Refer to the CPU documentation before setting the CPU voltage. Setting a high
VCore voltage may damage the CPU permanently, and setting a low VCore
voltage may make the system unstable.
FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage.
Conguration options: [Auto] [1.20V] [1.30V].
North Bridge Voltage [Auto]
Conguration options: [Auto] [1.25V] [1.40V] [1.55V] [1.70V].
