2-18
Chapter 2: BIOS information
AGP Aperture Size [128MB]
This field sets the size of mapped memory for AGP graphic data.
Configuration options: [16MB] [32M] [64M] [128M] [256M]
MEM Addr/Cmd Setup Time [2T]
Allows you to select the memory address and command setup timing to increase
performance. Configuration options: [2T] [Auto]
2T Turnaround Time [Enabled]
Enables or disables the 2T turnaround time.
Configuration options: [Enabled] [Disabled]
Separate By 1T [Enabled]
Enables or disables separate by 1T feature.
Configuration options: [Enabled] [Disabled]
AGP Transfer Mode [8X]
Displays the AGP transfer mode. The value for this field is auto-detected.
AGP Fast Write Mode [Disabled]
Enables or disables the AGP Fast Write Mode function.
Configuration options: [Enabled] [Disabled]
Performance Acceleration [Auto]
Allows you to select the performance accelaration type.
Configuration options: [FailSafe] [FullOn] [Auto]
Dynamic Clock Gating [Enabled]
Enables or disables the Dynamic Clock Gating function.
Configuration options: [Enabled] [Disabled]
