A SERVICE OF

logo

Open as PDF
next previous
4-26 Chapter 4: BIOS setup
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
→←
Select Menu Enter Select Sub-Menu F10 Save and Exit
ItemSpecicHelp
Select ‘Yes’ if you
want to clear the
Extended System
Conguration
Data (ESCD) area.
PCIConguration
ResetCongurationData [No]
Plug & Play OS [No]
Palette Snooping [Disabled]
PCIE1 Slot
PCIE2 Slot
PCI3 Slot
PCIX4 Slot
PCIX5 Slot
PCIX6 Slot
PhoenixBIOS Setup Utility
Advanced
4.4.3 PCI Conguration
This menu shows the PCI conguration settings. Select an item then press <Enter>
to display the conguration options.
Reset Conguration Data [No]
This item allows you to clear the Extended System Conguration Data (ESCD)
area. Conguration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS congures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
congures the Plug and Play devices not required for boot.
Conguration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Conguration options: [Disabled] [Enabled]