U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
P
P
a
a
g
g
e
e
2
2
7
7
o
o
f
f
3
3
7
7
Registration
Your HS315 is supplied with the handset and USB dongle already registered to the base
unit; you shouldn't need to register them. But if you've bought extra handset, you'll need
to register each one to your original base unit. Maximum 3 handsets can be registered to
one base.
To Enter Registration Mode
1. Select Settings under menu mode;
2. Press Left key, select Registration and the display shows Select Base, Base
Sub and De-register.
To register a handset
1. Press and hold the Handset locator button on the base unit for a while, until you
hear "beep" sound twice continuously;
2. Select Base Sub under Registration mode;
3. Press Left key again
The display shows BASE 1; BASE 2; BASE 3; BASE 4;
4. Press Scrolling button to scroll through the base, and press Left key, then
enter base PIN, and press Left key to confirm;
5. After a while, when the handset finds the base unit, it goes back to the standby
mode.
To de-register a handset
You may need to do this if you have more than one handset registered to your base unit
and you need to replace a faulty handset.
1. Select <de-register> under REGISTRATION mode.
2. Press Left key, then key in the PIN (default 0000).
3. Press Left key, then key in the number of the handset you want to de-register.
4. Press Left key to confirm.
Note: You cannot de-register the handset you are currently using.
