How to Change a Number Field Operating the Agilent 81133A/81134A Pulse Generator
Agilent 81133A/81134A Pulse Generator User’s Guide, January 2005 25
3 Press and rotate the navigation knob to set the least significant digit
to change.
NOTE This method is useful for fine-tuning. It also changes the values in real-
time, so that you can immediately see the changes at the output.
4 Rotate the navigation knob to change the value.
5 Press the navigation knob once when you are done.
Changing Single Digits
NOTE This procedure can also be used to change the unit of the parameter.
1 Focus at the number field by rotating the navigation knob to the
desired position.
2 Press and rotate the navigation knob to select the digit (number or
unit).
NOTE You can also press the arrows next to navigation knob.
3 Release the navigation knob.
Now when you rotate it, the number (or the unit) changes.
4 Press the navigation knob to set the number (or the unit).
You can now see the changes at the output.
Press
PressPress
Press
Press
PressPress
Press
Press
PressPress
Press
