POC-195 User Manual 6
1.3 Cleaning/Disinfecting
The POC-195 should be cleaned regularly.
Agents: Green tinctured soap and Enzymatic detergents
Steps:
1. Prepare agent according to the manufacturer's instructions or hospi-
tal protocol.
2. Wipe the POC-195 with a clean cloth that has been moistened in
the cleaning solution.
3. Wipe thoroughly with a clean cloth.
1.4 LCD Specifications
• Display type: 19" TFT LCD
• Resolution: 1280 x 1024
• Colors: 16.7M (RGB 8 bits/color)
• Dot size (mm): 0.294 x 0.294
• Viewing angle: 180°
• Luminance: 300 cd/m2
• Contrast ratio: 1300:1
• LCD MTBF: 50,000 hours
• Backlight lifetime: 50,000 hours
Caution! Do not immerse or rinse the POC-195 and its
peripherals. If you accidentally spill liquid on the
device, disconnect the unit from the power
source. Contact your Biomed regarding the con-
tinued safety of the unit before placing it back in
operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean the POC-195 or its
peripherals with strong aromatic, chlorinated,
ketone, ether, or Esther solvents, sharp tools or
abrasives. Never immerse electrical connectors
in water or other liquids.
