18
Warning! Not turning off the computer properly before
you start installing the components may cause serious
damage.
Do not attempt the procedures described in the following
sections unless you are a qualified service technician.
Post-installation instructions
Observe the following after installing a computer component:
1 See to it that the components are installed according to the step-
by-step instructions in their respective sections.
2 Replace any expansion boards or peripherals that you removed
earlier.
3 Replace the computer cover.
4 Connect the necessary cables and turn on your computer.
Opening The Case
Before you open the case, turn your computer off and unplug the
power cord from the wall outlet.
• Remove the retaining screws to release the cover panel.
• Slide the cover panel off.
