Zenoah G200PU Automobile Parts User Manual


 
Different from a glow engine, this engine does not require any special brake in.
After 5~10 tanks (2~3 hours), adjust the carburetor’s L and H needles if necessary.
After about 5 hours’ running, the max. engine speed will be slightly increased from initial
max.speed, owing to the engine having been conditioned.
STOPPING THE ENGINE
To stop the engine, either use the transmitter to achieve full closed throttle or turn the battery
switch off.
When you have stopped the engine and when not operating the engine, make sure to keep the
battery switch off.
ENGINE RUNNING TIME
13
BRAKE IN
120
60
0
Battery Capacity (mA)
1000
1500mA
2700mA
2000 3000
Condition:
new and fully charged battery
Running time (min.)
40min.
70min.
Recommended battery: 4.8V / 1500~2700mA
Because this engine uses a battery for power
supply, the engine’s continuous running time will
depend on battery capacity.
Please refer to the table on the right for guidelines.