Filter
Top Products
8-40
1
2
3
4
5
6
7
8
9
10
11
EBU28911
Replacing the fuse
The fuse holder is located beside the battery and
can be accessed as follows:
1. Remove the seat. (See page 4-12.)
2. Unhook the band, and then take out the own-
er’s tool kit and the low-pressure tire gauge.
3. Remove the battery cover by removing the
battery cover bracket bolts.
If the fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off all electrical
circuits.
CAUTION:
ECB00640
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
1. Low-pressure tire gauge
2. Owner’s tool kit
3. Bolt
4. Battery cover
3
4
2
1
1. Main fuse
2. Spare fuse
1
2