Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-9
3
EAU14180
Seats (XVS650)
Passenger seat
To remove the passenger seat
Remove the nut, and then pull the pas-
senger seat up.
To install the passenger seat
Insert the projection on the front of the
passenger seat into the seat holder as
shown, place the seat in the original po-
sition, and then install the nut.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts, and then pull
the seat up.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, place the seat in the
original position, and then install
the bolts.
2. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
1. Nut
1. Bolt
2. Seat holder
3. Projection
1. Seat holder
2. Projection
chapter3 Page 9 Tuesday, May 11, 2004 11:12 PM