Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-38
2
3
4
5
6
7
8
9
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
NOTICE:
Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
EAU46780
Replacing a license plate light
bulb
1. Remove the holding plate by re-
moving the bolts.
2. Remove the license plate light lens
by removing the bolts.
3. Remove the license plate light
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
1. Turn signal light bulb
1
1. Holding plate
2. Bolt
1
2
1. Bolt
1. License plate light bulb socket
2. License plate light bulb
3. License plate light lens
1
23
1