Filter
Top Products
Operation
65
and tilt switch “” (down) to retract the
trim rods.
NOTICE:
Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
[ECM00251]
EMU30192
Procedure for tilting down (manual
tilt models)
1. Place the tilt lock lever in the lock posi-
tion.
2. Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3. Slowly tilt the engine down.
EMU33120
Procedure for tilting down (power
trim and tilt models)
1. Push the power trim and tilt switch “”
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support knob
becomes free.
2. Pull out the tilt support knob.
3. Push the power trim and tilt switch “”
(down) to lower the outboard motor to
the desired position.
ZMU02306
ZMU06545
DN
ZMU01936
UP
DN
DN
ZMU06546