Filter
Top Products
Control functions
36
3. Align the holes in the backrest bracket
with the bolts on the carrier lock bracket,
and then place the backrest on the carrier
lock bracket.
4. Align the holes in the rear carrier with the
bolts on the carrier lock bracket, and then
place the rear carrier on the carrier lock
bracket.
5. Slide both the backrest and the rear car-
rier backward until they stop.
6. Pull the carrier lock lever up to lock the
backrest and the rear carrier in place.
Then, place the lever under the rear car-
rier and secure it with the holder.
ESU10863
Tow hitch bracket (RST90 /
RST90PGT)
NOTICE
ECS00241
To prevent premature wear of the V-belt,
avoid traveling under 10 km/h (6 mi/h)
when towing for long distances or long pe-
riods of time.
This snowmobile is equipped with a tow hitch
bracket that is used to install a tow hitch.
Use the tow hitch bracket within the specified
weight limits.
TIP
A tow hitch is available at a Yamaha dealer.
1. Hole
1. Bolt
1. Carrier lock lever
1. Tow hitch bracket
Tow weight limit:
120 kgf (264 lbf)
Vertical weight limit:
15 kgf (33 lbf)
1
U8HV10E0.book Page 36 Monday, May 16, 2011 1:15 PM