Filter
Top Products
8-33
8
will affect carburetor jetting with subsequent
poor performance and possible engine over-
heating.
EBU23881
Cleaning the spark arrester
Be sure the exhaust pipe and muffler are cool be-
fore cleaning the spark arrester.
1. Remove the bolts.
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from the
spark arrester portion of the tailpipe and inside
of the tailpipe housing.
4. Insert the tailpipe into the muffler and align the
bolt holes.
5. Install and tighten the bolts.
1. Bolt
2. Tailpipe
1. Tailpipe
2. Spark arrester
U1P113E0.book Page 33 Friday, May 19, 2006 9:10 AM