Filter
Top Products
FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-3
5
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
7-17, 7-25
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-25
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-23, 7-24
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-18, 7-20
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
7-26
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-26
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
7-27
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
4-21
ITEM CHECKS PAGE
U3C313E0.book Page 3 Monday, August 18, 2008 2:18 PM