Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-36
7
EAU24115
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-14.)
2. Remove the tail/brake light bulb
socket (together with the bulb) by
turning it counterclockwise.
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
EAU43004
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw.
1. Tail/brake light bulb socket
1
1. Turn signal light unit
2. Screw
1
2
1. Turn signal light bulb socket
1. Turn signal light bulb
1
1
U39P11E0.book Page 36 Monday, August 1, 2011 5:00 PM