Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
EAU00118
Handlebar switches
EAU00119
Pass switch “ ”
Press this switch to flash the headlight.
EAU03888
Dimmer switch “
/ ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
EAU04077
Windshield position adjusting
switch “ ”
To move the windshield up, push this
switch in direction
a
. To move the
windshield down, push the switch in di-
rection
b
.
NOTE:
_
When the engine is turned off, the
windshield will automatically return to
the lowest position.
_
EAU03889
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “ ”. To signal a left-hand
turn, push this switch to “ ”. When
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
EAU00129
Horn switch “ ”
Press this switch to sound the horn.
EAU03890
Engine stop switch “ / ”
Set this switch to “ ” before starting
the engine. Set this switch to “ ” to
stop the engine in case of an emergen-
cy, such as when the motorcycle over-
turns or when the throttle cable is
stuck.
EAU00143
Start switch “ ”
Push this switch to crank the engine
with the starter.
EC000005
CAUTION:
_
See page 5-1 for starting instruc-
tions prior to starting the engine.
_
1. Pass switch “ ”
2. Windshield position adjusting switch “ ”
3. Dimmer switch “ / ”
4. Turn signal switch “ / ”
5. Horn switch “ ”
1. Engine stop switch “ / ”
2. Start switch “ ”
E_5jw.book Page 5 Friday, March 30, 2001 2:14 PM