Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-21
6
“broken in”. Therefore, it is ad-
visable before doing any high-
speed riding to ride conserva-
tively for approximately 100 km
(60 mi) after installing a new tire.
● The tires must be warmed up
before a high-speed run.
● Always adjust the tire air pres-
sure according to the operating
conditions.
EAU21960
Cast wheels
To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.
● The wheel rims should be checked
for cracks, bends or warpage be-
fore each ride. If any damage is
found, have a Yamaha dealer re-
place the wheel. Do not attempt
even the smallest repair to the
wheel. A deformed or cracked
wheel must be replaced.
● The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.
● Ride at moderate speeds after
changing a tire since the tire sur-
face must first be “broken in” for it
to develop its optimal characteris-
tics.
EAU22010
Accessories and replacement
parts
WARNING
EWA10620
This motorcycle is not designed to
pull a trailer or to be attached to a
sidecar. The accessories or replace-
ment parts you choose for your
motorcycle should be designed spe-
cifically for this model, and they
must be securely mounted to main-
tain the inherent stability of the orig-
inal design. Genuine Yamaha Parts
and Accessories are designed and
tested to be compatible with your
motorcycle. Please consider Genu-
ine Yamaha Parts and Accessories
before making a purchase. Use of
non-Yamaha-approved accessories
or replacement parts may cause
loss of handling stability and riding
safety. Since Yamaha cannot control
the quality of accessories or parts
manufactured by other companies,
Yamaha cannot be held liable for
5JW11.book Page 21 Friday, May 9, 2003 4:03 PM