Filter
Top Products
EBU00891
Transmission oil
Transmission oil measurement
1. Place the machine on a level surface.
2. Remove the screw and check the oil level. It
should be up to the brim of the hole. If the
level is low, remove the oil filler bolt and add
oil to raise it to the proper level.
8. Fill the engine with oil and install the dipstick.
cC
Be sure no foreign material enters the
crankcase.
9. Warm up the engine for several minutes at
idle speed. Check for oil leakage while warm-
ing up.
cC
If oil leakage is found, stop the engine imme-
diately and check for the cause.
8-7
w
e
q
Recommended oil:
See page 10-2.
Oil quantity:
Periodic oil change
1.25 L (1.10 Imp qt, 1.32 US qt)
Total amount:
1.45 L (1.28 Imp qt, 1.53 US qt)
1. Screw 2. Brim 3. Correct oil level
5VJ-9-10-3 3/26/02 7:31 PM Page 8-8