Whistler XTR-190 Radar Detector User Manual


 
Quiet Mode
Quiet cancels audio during an alert and any new
alert within 20 seconds. After 20 seconds,
approximately 2 beeps are provided on any new
alert and unit then remains quiet.
• Press Quiet to cancel the audio.
• Press Quiet a second time during an alert to
restore the standard audio alert pattern; or turn
the unit off, then on.
Auto Quiet Mode
Auto Quiet reduces the selected audio level to
level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert for any
new signal within 20 seconds will resume at level
(1). Auto Quiet does not affect VG-2 or laser
alerts.
• Press Quiet/Menu (before a signal is detected)
to engage Auto Quiet.
• Once the Auto Quiet mode is engaged, you
may cancel the audio alarm by pressing Quiet.
• Press Quiet (when the unit is not alarming) to
cancel Auto Quiet mode.
OPERATION
City/City I/City II Mode
Whistler’s Three Stage City Mode is designed to
reduce the annoyance of automatic door open-
ers, intrusion alarms and other devices which
share frequencies with police radar. Generally, X
band is used for these devices.
• Press City to cancel Highway mode and
engage City. Display will switch from “
H
H
” to “
C
C
Pr
ess City again to enter City
I
I
Mode
• Press City again to enter City
I
I
I
I
Mode
N
N
o
o
t
t
e
e
: After 3 seconds, “
I
I
” or “
I
I
I
I
” City Mode
indicator turns of
f.
• Pressing City a fourth time cancels City
I
I
I
I
Mode
and r
eturns the unit to Highway Mode.
In City Mode, weak speed/safety radar signals
give an initial alarm of two beeps, and then
remains quiet unless the signal becomes very
strong. When the signal strength increases, two
additional beeps are provided. City
I
I
and City
I
I
I
I
Modes operate the same as Highway Mode, but
in City
I
I
Mode, only the X band sensitivity is low-
e
red. In City
I
I
I
I
Mode, X-band is not detected.
Caution: Some towns/small cities may still be
using X band radar. City Modes do not change
the audio alert for laser or VG-2.
OPERATION
Highway Mode
Highway mode provides full audio warnings any
time radar (X, K, Ka, Safety Radar) or laser sig-
nals are detected, and is recommended for open
road driving.
For more information on City and Highway mode,
please visit our FAQ page on our website:
www.whistlergroup.com
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and Quiet simultaneously and release.
• Unit will go thru all the bands detected.
• Press Power to exit.
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the
display
• Press and hold “Power” for 2 seconds to
reduce illumination to a dim setting
• Pressing and holding the “Power” button a
second time engages Dark Mode. The
display illumination is further reduced.
Dim or Dark can be engaged during an alert. In
Dark Mode, the display goes dark for as long as
a signal is being detected and 20 seconds after,
then the display returns to the dimmer setting.
• Pressing and holding the “Power” button a
third time restores the display to full
illumination.
OPERATION
8910