Whistler PRO-3450 Radar Detector User Manual


 
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
1 = weak signal, 9 = strong signal
Pulse Protection
®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display reads:
After 3 seconds standard alert pattern continues.
RADAR ALERT
15
OPERATION
14
10th time Ka ON D = ON Turns Ka Band ON
C = OFF Turns Ka Band OFF
11th time Laser ON D = ON Turns Laser ON
C = OFF Turns Laser OFF
12th time Voice OFF D = ON Real Voice
®
ON
C = OFF Real Voice
®
OFF
13th time DSP NOR D or C Normal
Vertical
Reversed
*Factory settings.
Press and hold P/V twice anytime to exit. NOTE:
Turning
POP
Mode off, turns on VG-2.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
P r ess C i t y and Q u i e t simultaneously and release. Display re a d s :
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
Press P/V to exit.
Voice Module Port
Allows you to use an optional Whistler Voice Module, Ord e r
Code 202971 (See accessory page for ordering, option mode
for programming). Any other device may damage the unit
and void your warranty. When mute or auto quiet modes
a r e engaged, the audio will be cancelled to the voice port.
Rear Laser Port
Allows you to use an additional optional laser receiver for
enhanced coverage for the rear of the vehicle. NOTE:
Front
and rear laser modual for front windsheild included.
Pro-3450_OwnersManual.qxd 3/15/04 4:30 PM Page 17