Whistler 1732 Radar Detector User Manual


 
W
histler’s ergonomic and user-friendly design
provides a new level of operating convenience. Special
f
eatures include:
Note: Not all units have all features listed.
1. Bracket Release Button –
Provides quick
and easy release of the mounting bracket.
2. Speaker Provides distinct audio warnings
for X, K, Ka band radar, safety radar, laser and
VG-2.
3. Mounting Bracket Location – Slot holds
mounting bracket firmly.
4. Radar Antenna – Compact, high-efficiency
antenna receives radar signals.
5. Front Laser Antenna – High gain optical
lens provides increased sensitivity and field
of view for leading-edge laser detection.
6. Rear Laser Antenna – An integrated optical
waveguide provides superior detection of
laser signals transmitted from behind.
7. City Button - Reduces the annoyance of
false
aler
ts typically encountered in urban
driving areas.
8. Quiet/Menu Button - Pressing QUIET
before a signal is detected engages Auto
Quiet Mode which automatically reduces
the audio level after the initial warning to a
low audio level setting. Pressing QUIET
during a radar/laser encounter silences
audio alerts, while allowing visual alerts to
keep you informed. Pressing and holding for
2 seconds allows you to select VG-2 on/off. 1733 &
1734 only (see page 15).
9. Power / Volume Control – Turns unit on/off
and adjusts audio level.
Power/Dim Dark (1734 Only) - Turns unit
on/off and engages Dim/Dark modes press and
hold for 2 seconds).
10. Volume Up/Down Buttons – Adjust volume up or
down.
FEATURE DESCRIPTIONS
1
1. Icon Display -
o
ffers easy-to-read display to
indicate power, city mode, radar band
i
detification, and signal strength.
11a. LED Display - multiple indicator lights help
you determine the radar source and your
distance from it.
11b. 7 Segment Icon Display (1734 only) -
combines icon display with a 7 segment digital
display that shows signal strength indication
and band identification.
12. VG-2/Laser Indicator – Shows the unit is
receiving VG-2 or laser signals.
13. X-band Indicator - Shows the unit is
receiving an X-band signal.
14. K-band Indicator - shows the unit is
receiving a K-band signal.
15. Ka-band Indicator - Shows the unit is
receiving a Ka-band signal.
16. H - Unit is in Highway mode.
17. C - City Indicator - Shows that the unit is
operating in city mode.
18. Signal Strength Indicator - Shows the
strength of the signal being detected.
19. Power On Indicator - shows that the unit is
receiving power.
20. K/Ka-band Indicator - Shows the unit is
receiving a K or Ka band signal. K/Ka
indicator will flash for Ka band.
21. V- Shows that the unit is receiving a VG-2
signal.
22. VG-2 Button (1730/1732 Only)- Engages
VG-2 detection mode.
Total Band Protection™ - Complete Band
Coverage that detects laser, radar, VG-2 and safety
radar bands.
FEATURE DESCRIPTIONS
56
Mounting Guidelines
M
ount the unit as low as possible near the center of
t
he windshield.
Do not mount your unit behind wipers,
ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can affect
radar and laser signals and reduce critical
warning time.
(Regular tinted glass does not affect
reception.)
Some windshields have an Instaclear
or
Electriclear
type coating, which affect radar
signals. Consult your dealer or the owner’s
manual supplied with yourvehicle to determine if
your windshield has this coating.
Avoid placing unit in direct contact with wind
shield.
To reduce the possibility of theft, conceal your
unit when not in use.
Windshield Mounting
Install the two suction cups and rubber bumper
onto the bracket by fitting them into their holes.
Press the suction cups onto the windshield at the
location you have chosen.
IMPORTANT: Some newer cars have a plastic
safety coating on the inside of the windshield. The
windshield bracket may leave permanent marks on
this type of surface.
To find out if your vehicle has this
type of windshield, check the owner’s manual or ask
your dealer. We recommend that you do not leave
the suction cup bracket on the window in direct
sunlight. If the detector is removed, this may cause
blistering of the dash in some vehicles.
INSTALLATION
7