Filter
Top Products
OPERATION
11
OPERATION
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one
beep confirms feature “on”, two beeps confirm feature
“off”.
Audio Level Adjustment
The audio levels can be adjusted high to low, or low to
high, in seven steps:
• Press Volume up to increase audio level.
• Press Volume down to decrease audio level.
As audio level is adjusted, beeps are provided and the dis-
play indicates volume level. Example:
10
Auto Quiet Mode
Auto Quiet reduces the selected audio level to a level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20 sec-
onds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
• Press Quiet/Record (before a signal is detected) to
engage Auto Quiet. Unit will beep once.
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing Quiet/Record.
• Press Quiet/Record (when the unit is not alarming) to
cancel Auto Quiet mode. Unit will beep twice.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, approximately 2 beeps
are provided on any new alert and unit then remains quiet.
• Press Quiet/Record to cancel the audio.
• Press Quiet/Record a second time during an alert to
restore the standard audio alert pattern; or turn the unit
off, then on.
1670LD manual 4/11/02 11:48 AM Page 13