Filter
Top Products
Power On And Self-Test
Each time your Whistler detector is turned on, an auto-
matic self-test sequence confirms that the speaker and
visual displays are functional.
During Power Up, all the LEDs illuminate, while the X, K,
and Ka alerts are sounded in sequence.
After the alert the 1st and 3rd alert LEDs flash and the
Safety Radar alert is sounded. At the end of the self-test
sequence the unit is in the highway mode.
Feature Engaged Confirmation
Each time a button is pressed one beep confirms feature
“on”, two beeps confirm feature “off”.
The audio alerts are continuous, but have a Geiger counter-
like pattern to help you determine your distance from the
radar source; the faster the beeping, the closer you are to the
transmitting source.
At the same time, illumination of multiple LEDs indicates rel-
ative signal strength.
OPERATION
8
Power On
LED
City On
LED
Radar
Visual Alert