Whistler 1505 Radar Detector User Manual


 
When visor mounting, make sure your unit is relatively
level and has a clear view of the road ahead.
Power Connection
Plug the small end of the power cord into the
unit’s power jack, then plug the large end of the
cord into your vehicle’s lighter socket. Make
sure the plug fits snugly, and be sure to keep the
socket and contacts free of ashes and dirt.
Windshield Mounting (optional accessory)
With the windshield mounting kit your Whis-
tler detector can be mounted to your vehicle’s
windshield. Although not included it is avail-
able through many Whistler retailers or can be
ordered directly from Whistler. (See pg.26 for
available accessories and pricing.) First, install
the two suction cups and rubber bumper onto
the bracket by fitting them into their holes.
Now, press the suction cups onto the wind-
shield glass at the location you have chosen.
Slide the detector onto the bracket until it
locks into place. If necessary, you may adjust
the bracket to the proper angle by bending it.
To remove the bracket, pull the tab on each
suction cup.
To make the unit level, you can easily adjust the angle of the
windshield bracket by bending it.
Fuse Replacement
The lighter socket plug is equipped with a
replaceable 2 amp 3AG fuse located be-
hind the silver tip. To replace the fuse,
carefully unscrew the tip of the plug. (Im-
portant note: Unscrew slowly. The tip con-
tains a spring which may fly out when disas-
sembling.) Insert the new fuse with spring
and screw the tip on. With use, screwcap on
plug may loosen. Retighten occasionally.
Unscrew the tip of the lighter socket plug carefully when
replacing the 2 amp fuse.
The following accessories are available through
Whistler retailers or can be ordered directly
from Whistler by calling 1-800-531-0004.
Order Description Price
202138 Visor Bracket $6.95
202139 Windshield Bracket $9.95
206552 Straight Power Cord (5') $14.95
206553 Coiled Power Cord (7') $15.95
206879 Velcro $ 1.95
206880 Hardwire Kit (10') $ 9.95
Shipping and Handling (Per Order) $ 3.00
Massachusetts residents please add applicable sales tax.
Prices are subject to change without notice.
INSTALLATION
13
INSTALLATION
14
INSTALLATION
15
TROUBLESHOOTING GUIDE
16
TROUBLESHOOTING GUIDE
17
SPEED MONITORING TECHNOLOGIES
18
Radar Facts
Very simply, a radar gun operates by transmit-
ting radio waves at certain frequencies which
reflect off objects and are then picked up by
the radar gun’s receiving section.
When a radar beam reflects off a moving target,
such as your vehicle, a measurable frequency
shift occurs. The radar unit converts this shift into
miles per hour to determine your vehicle’s speed.
Currently, the FCC (Federal Communications
Commission) permits operation of traffic radar
guns at these frequencies:
X band (10.500 GHz - 10.550 GHz)
K band (24.050 GHz - 24.250 GHz)
Ka band (33.400 GHz - 36.000 GHz)
Laser Facts
It’s well documented that many radar guns
cannot reliably provide the speed of a tar-
geted vehicle that is traveling in a group of
vehicles. In contrast, a laser gun can target a
specific vehicle out of a line of traffic and
determine its speed.
The advantage of laser over radar in terms of
target identification is the result of the laser
gun’s narrow beam. A radar transmission can
cover more than a four-lane highway at a
distance of 1,000 feet, compared with a laser
transmission which covers about 6 feet at the
same distance. This is one reason why laser is
more difficult to detect than radar.
SPEED MONITORING TECHNOLOGIES
20
ARE DETECTORS LEGAL?
21
Are Detectors Legal?
Laser detectors are completely legal in every
state when used in automobiles or light trucks
(under 10,000 lbs.). Similarly, when used in
automobiles or light trucks, radar detectors
are legal in almost every state. Exceptions are
Virginia and Washington D.C., which have
local regulations restricting the use of radar
receivers in any vehicle.
Concerning trucks over 10,000 lbs., the Fed-
eral Highway Administration (FHwA) issued a
regulation, effective January, 1994 which pro-
hibits radar and laser detector use in these
types of vehicles nationally.
Because of legal and legislative efforts under-
way to repeal the regulation, and because en-
forcement varies from state to state, we recom-
mend contacting the Radio Association De-
fending Airwave Rights (R.A.D.A.R.) for the most
current information concerning the status and
enforcement of the FHwA regulation in areas
where you travel. RADAR can be reached at:
Telephone: (513) 667-5472
Fax: (513) 667-3178
Prior to the FHwA regulation, laws existed in
the state of New York restricting the use of
radar detectors in trucks over 18,000 lbs. and
in Illinois in trucks over 26,000 lbs.
WARRANTY INFORMATION
22
Consumer Warranty
Your Whistler detector is warranted to the origi-
nal purchaser for a period of one year from the
date of original purchase against all defects in
materials and workmanship. This limited war-
ranty is void if the unit is abused, modified,
installed improperly, if the housing has been
removed, or if the serial number is missing.
There are no express warranties covering this
product other than those set forth in this war-
ranty. All express or implied warranties for this
product are limited to one year. Whistler is not
liable for damages of any type arising from the
use, misuse, or operation of this product.
Service Under Warranty
During the warranty period, defective units will
be repaired or replaced (with the same or a
comparable model), at Whistler’s option, with-
out charge to the purchaser when returned
prepaid, with dated proof of purchase to the
address on pg. 23. Units returned without dated
proof of purchase will be handled as described
in the section “Service Out Of Warranty.” Due
to the specialized equipment necessary for test-
ing a radar/laser receiver, there are no autho-
rized service stations for Whistler brand detec-
tors other than the factory.
WARRANTY INFORMATION
23
When returning a unit for service under war-
ranty, please follow these instructions:
1. Ship the unit in original carton or in a suitable
sturdy equivalent, fully insured, with return
receipt requested, and shipping charges
prepaid to:
Whistler CTS
16 Elizabeth Drive
Chelmsford, MA 01824
IMPORTANT: Whistler will not assume responsi-
bility for loss or damage incurred in shipping.
Therefore, please ship your unit insured with
return receipt requested.
2. Include with your unit the following informa-
tion, clearly printed:
Your name and street address (for shipping
via UPS), and a daytime telephone number.
(No P.O. Box please.)
A detailed description of the problem (e.g.,
“Unit performs self-test but does not respond
to radar”).
A copy of your dated proof of purchase or
bill of sale.
3. Be certain your unit is returned with its serial
number. For reference, we recommend keep-
ing a record of your unit’s serial number. Units
without serial numbers are not covered under
warranty.
WARRANTY INFORMATION
24
IMPORTANT: To validate that your unit is
within the warranty period, make sure you
keep a copy of your dated proof of purchase.
Service Out Of Warranty
Units will be repaired at “out of warranty”
service rates when:
The unit’s original warranty has expired.
Dated proof of purchase is not supplied.
The unit has been returned without its serial
number.
The unit has been abused, modified, installed
improperly, or had its housing removed.
The minimum out of warranty service fee for
your Whistler detector is $45.00 (U.S.). If you
require out of warranty service, please return
your unit as outlined in the section “Service
Under Warranty” along with a certified check
or money order for $45.00. (Payment may also
be made by MasterCard or Visa; personal
checks are not accepted.) In the event repairs
cannot be covered by the minimum $45.00
service fee, you will be contacted by a Whistler
technical service specialist who will outline
options available to you. If you elect not to
have your unit repaired/replaced, it will be
returned to you and your money refunded.
IMPORTANT: When returning your unit for
service, be certain to include a daytime tele-
phone number.
WARRANTY INFORMATION
25
Code
Dash Mounting
Make sure the mounting location you have
chosen is clean and dry. Clean with isopropyl
alcohol if necessary to remove any waxes or
polishes.
Separate the Velcro
®
fastener strips. Peel the
backing off each strip, adhere one piece to the
dash and the other piece to the bottom of the
unit, taking care not to cover the serial number.
Be careful not to place the Velcro over the unit’s serial
number. If the Velcro is removed, the serial number may
be pulled off the unit. Units without serial numbers are
not covered under warranty.
When joined, the two strips provide a secure
mount, yet the unit can be easily removed for
safekeeping when not in use. Once mounted, your
unit is ready to be connected to the power cord.
Visor Mounting
Place the bracket into the bracket mounting slot
of the detector. To install your detector on the
visor, slide bracket clip over the rear edge of the
visor as shown in the illustration.
For best protection keep these additional sug-
gestions in mind:
Because your vehicle’s license plate or head-
lights are the laser gun’s primary targets,
mounting your Whistler detector on the dash
can improve laser detection at short range.
Do not follow closely behind any vehicle you
cannot see through. If you can’t see past a
vehicle ahead of you, chances are your de-
tector won’t either.
The receiving range of your laser detector will
not be the same as a radar detector. Laser
guns are most often used at short range.
Other Speed Detection Systems
Several techniques other than radar or laser are
used to measure vehicle speeds. When these
methods are being used, no detector can pro-
vide a warning. These techniques include:
Pacing - A patrol car drives behind you and
matches your driving speed.
Vascar/Aircraft - The time it takes a vehicle to
travel a known distance is measured.
Radar Detector Detectors
The Interceptor VG-2, or simply VG-2, is a
microwave receiver used by police to detect
signals radiated by the local oscillator of a
radar detector. Because its purpose is to iden-
tify persons driving with radar detectors, the
VG-2 is known as a “radar detector detector”.
The VG-2 is the primary tool used by the
police to identify radar detector equipped
vehicles. If caught, drivers risk losing their
radar detector and receiving a fine. In addi-
tion, instant-on radar is almost always used
in combination with the VG-2, leaving un-
suspecting motorists vulnerable to receiv-
ing two tickets - one potentially for speed-
ing, the other for possession of a detector.
Having a radar detector capable of detecting
the VG-2 alerts you to the presence of a speed
trap and preserves your radar detector invest-
ment.
SPEED MONITORING TECHNOLOGIES
19
ACCESSORIES
26
If your unit has been correctly installed follow-
ing the guidelines in this manual, but is not
operating optimally, please refer to this chart:
Problem Action
No display or
audio.
• Check fuse in Whistler
plug; replace if
necessary.
• Check fuse for lighter
socket; replace if
necessary.
• Make sure lighter
socket is clean and
fully operational.
Check for loose lighter
socket; tighten and
clean socket.
Check connections at
both ends of power
cord.Substitute another
cord to determine if cord
is defective. Return de-
fective cord to factory.
Unit alarms when
vehicle hits
bumps.
Problem Action
• Check vehicle's
electrical system,
including battery and
alternator.
• Install a filter capacitor
(470µfd. 25 volt or
larger capacitance
value) on the back of
the lighter socket.
Unit alarms when
using vehicle
equipment or
electrical accesso-
ries (brakes, power
mirrors/windows,
directionals, horn,
etc.).
• Cancel Pre-set Audio-
Quiet. (see pg. 6).
• Check PWR/VOL
control setting.
Audio alerts are
not loud enough.
Your Whistler detector is expertly engineered
and designed to exacting quality standards to
provide you with reliable, trouble-free opera-
tion. If difficulties occur which cannot be
solved by information provided in this Trouble-
shooting Guide, please call Whistler Customer
Technical Service at 1-800-531-0004 before
returning your unit for service.
Customer Service
If you have questions concerning the opera-
tion of your Whistler detector, or service dur-
ing or after the warranty period, please call
Customer Technical Service at 1-800-531-0004.
Representatives are available to answer your
questions Monday- Friday from 9:00 a.m. to
5:00 p.m. (EST).
Serial Number
Slide on visor
Insert into bracket
mounting slot