VTech 2118 Automobile Battery Charger User Manual


  Open as PDF
of 8
 
2
GETTING STARTED
Installing the Rechargeable Battery Packs
1.MakesuretheInnoTab
®
3orInnoTab
®
3Sisturnedoff.
2.Turntheunitover.Slidethebatterydoorlockswitch(orswitches)forward
andpushthebatterycoversofftoeachsidetoremovethem.
3.Removeanyoldbatteriesthatmaybeinthetoy.(Batteryremovaland
replacementshouldbedonebyanadult.)
4.InsertBatteryPack① into the compartment on the right side and
Battery
Pack
② into the compartment on the left side.
•Insertthebatterypackintotheconnectorslotfirst.
•Thenpressthebatterypackdownuntilitrestsinplace.
5.Replacethebatterycovers.
InnoTab
®
3
InnoTab
®
3S
Charging and Recharging the Batteries
Therechargeablebatteriesshouldbefullychargedbeforethefirstuse.Tocharge
andrechargethebatteries,pleasefollowtheinstructionsbelow.
1.Makesurethebatterypacksareinstalledinthetablet.
 previous next