VTech 201600 Automobile Battery Charger User Manual


  Open as PDF
of 6
 
• TheLED(s)willashtoindicatechargingisinprogress.
Whenthebatteriesarefullycharged,theashingLED(s)willturntoasolidcolor.
• Aftercharging,disconnectthechargerfromthepowersourceandremovethe
batteries. This prevents overcharging the batteries and reduces wear and tear on
the charger.
Care & Troubleshooting Tips
• Cleanthechargerwithacleandrycloth.Keepingthemetalcontactscleanwill
also help maintain performance.
• Makesurethattheunitisproperlypluggedintothewall.
• IftheLEDdoesnotashtoindicatethatthebatteryischarging,thebatterymay
be improperly inserted or defective, or there there may be a short circuit.
• Thechargingtimewillvarydependingonthetypeandcapacityofyourbatteries.
Please refer to the charging table on the following page for the appropriate
charging time.
• Correctlyinsertthebatteriesandavoidreversingthe+/-polarities.
• ThechargerisintendedforusewithNi-MHbatteriesonly.Chargingotherbattery
types may cause explosions, breakage, personal injury or property damage.
Specications
Input: AC 100-120V
~
50Hz/60Hz
Output: DC 2 X (2.8V 300mA) AA Size
DC 2 X (2.8V 150mA) AAA Size
3
 previous next