Filter
Top Products
10 Audio
Bluetooth
®
hands-free connection
10
260
•
Mute microphone: mute the audio sys-
tem’s microphone.
•
Transfer call to cell: transfer the call from
hands-free to the cell phone.
•
Phone book: this feature enables you to
search for a stored telephone number.
NOTE
•
On certain cell phones, the connection
is broken when the mute function is
used, which is normal. If this happens,
the hands-free system will prompt you
to reconnect.
•
A new call cannot be initiated while
another call is in progress.
Sound settings
Call volume
Call volume can be adjusted while a call is in
progress using the buttons in the steering
wheel keypad.
Audio system volume
When PHONE is displayed, volume for the
audio system can be adjusted in the normal
way with the audio system's volume control. In
order to adjust volume during a phone call, the
audio system must be switched to one of the
other modes (FM, CD, etc).
Audio system sound can be automatically
muted when a phone call is received in
Phone Menu…
Phone settings…
Sounds and volume… Mute radio and
adjust the volume with the
/ keys on the
center console.
Ringing volume
Go to Phone Menu… Phone settings…
Sounds and volume… Ring volume
and adjust the volume with the
/ keys on
the center console.
Ringing tones
The hands-free system’s integrated ringing
tones can be selected in Phone Menu…
Phone settings… Sounds and volume…
Ring signals… Ring signal 1, etc.
NOTE
The connected cell phone’s ring tone is not
switched off when one of the hands-free
system's ringing tones is used.
If you prefer to use the connected cell phone’s
ring tone
1
, go to Phone Menu… Phone
settings…
Sounds and volume… Ring
signals…
Use cell phone signal
More information about registering
and connecting cell phones
A maximum of 5 cell phones can be registered
in the hands-free system. Registration only
needs to be done once for each phone. After
registration, the cell phones can then be found
in the list of registered phones. Only one cell
phone can be connected to hands-free at a
time. Phones can be unregistered in Phone
Menu…
Bluetooth… Remove phone
Automatic connection
When the hands-free system is active and the
most recently connected cell phone is within
range, it is detected automatically. When the
audio system searches for the most recently
connected phone, this phone’s name appears
in the display. To manually connect a different
cell phone, press EXIT.
Manual connection
To connect a phone other than the one that
was most recently connected or to switch
1
Not supported by all cell phones.