Viper 591XV Automobile Alarm User Manual


 
1122
©
2005 Directed Electronics—all rights reserved
A page is the signal the 542 control module sends to the remote
control as confirmation of receipt of a command.
When the remote control receives a page it will generate a page
notification to the user (notifications are audible beeps or remote
vibration) and the LCD Icons will display the current system
status.
When a command (lock/unlock, remote start, or auxiliary
channel) from the remote control is sent and received, the system
will send a command page back to confirm receipt.
The remote control will leave a zone icon illuminated when it
has received a triggered response and will wait for you to recog-
nize the violation. Press any button on the remote control, the
LCD information and Alarm Page alerts will be cleared.
note: The remote control buttons will not send a com-
mand to the system until the alarm page is cleared.
PPaaggee RReeccooggnniittiioonn MMooddee
note: When the system is in Valet mode, the remote con-
trol will show the lock (5) and unlock (6) icons, but will
not generate a command page.
CCoommmmaanndd PPaaggee
SSyysstteemm SSiiggnnaall PPaaggiinngg FFeeaattuurreess