Viper 5101 Automobile Alarm User Manual


 
36
© 2008 Directed Electronics. All rights reserved.
Remote Start•
Press . The parking lights turns on (if connected). The vehicle starts
and runs for the programmed duration.
Rear Defogger•
Press four-times, and then press (only after remote start is On.)
The parking lights flash 4 times confirming activation of the defogger
output.
To disable the remote start system•
Move the shutdown toggle switch to the Off position.
Location of Shutdown Toggle Switch___________________
Valet Mode•
Press two-times and then
1
3
4
5
6
2
A U
X
. The LED on the control center comes
on solid to indicate the system is in valet. The same sequence on the
remote can be used to exit valet made. The LED turns off when valet
mode is exited.
Valet take-over•
Before turning Off the engine, press and release the 1. button.
Then wait a few seconds.
Turn the ignition key to the Off position.2.
Exit the vehicle and lock the doors with the remote.3.
The engine will remain running until the programmed time elapses
or a shut-down input is received.
Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference.